Connect with us

HarmonyOS

Huawei Mate 40E grabs November 2021 security update

Published

on

Huawei Mate 40E

Huawei has started delivering the latest November 2021 HarmonyOS security update for the Huawei Mate 40E smartphone. As per the info, this firmware update comes with build version HarmonyOS 2.0.0.212 and rolling out in China.

At present, Huawei has spread its security patch rollout among the devices to protect smartphones against viruses and CVEs. The Mate 40E phone receiving this update are:

  • Huawei Mate 40E
  • Huawei Mate 40E 4G

For your information, aside from security improvements, the company has not sent any optimizations or additional features to the system. So, if this firmware appearance on your devices then download and install it for better system security.

If you want to send us Tips, Update Screenshots, or a Message? connect with us here:

  • Screenshots@huaweicentral.com
  • Tips@huaweicentral.com
  • Message us on Twitter

Huawei Mate 40E November 2021 update

Previous Update:

The last update of Huawei Mate 40E brought new camera modes, fixes the problem of the camera watermark, and optimizes the display interface of the control center. Additionally, it improved the system security and operation experience of the drop-down status bar in the game scenarios.

Advertisement

Update Note:

  • The update is rolling out in batches so it may take some time/days to reach your device.
  • EMUI version and size may vary.
  • Maintain enough battery and storage on your device.

HOW TO UPDATE:

Download via Settings:

  • Open Settings
  • Click on the System & Updates
  • Open Software update
  • Tap on Check for updates option
  • If an update is available, click on Download and install
  • After installation Reboot the device

Download via Support app:

  • Open the Support app on your device
  • Go to the Service tab
  • Click on the update button
  • Tap on Check for update option
  • If an update is available, click on Download and install
  • After installation Reboot the device

Huawei Mate 40E:

  • Display size: 6.5 inch
  • Resolution: 2376 x 1080 resolution
  • Refresh rate: 90Hz
  • Touch sampling rate: 240Hz
  • Processor: Kirin 990E 5G
  • Software: EMUI 11
  • Connectivity: Bluetooth 5.2, GSM, HSPA, LTE, 5G, WiFi 6+, NFC
  • Rear camera: 64MP +16MP+8MP
  • Front camera: 13MP
  • Battery: 4200mAh with 40W wired and wireless super-fast charging support.
  • Storage: 8GB RAM and Internal storage: 128GB and 256GB

Amy is our firmware and software specialist, she keeps her eagle eyes open for new software rollouts, beta programs, and other software related activities as well as new smartphone launch.

HarmonyOS

Huawei Sound Joy smart speaker improves system stability with new update

Published

on

Huawei sound joy uk launched

Huawei Sound Joy is receiving a new update with stability improvements globally. Besides, the latest firmware brings a handful of fixes to the known issues and security exploits in the device system.

According to the input revealings, the Huawei Sound Joy stability improvements update is rolling out with HarmonyOS 2.1.0.30 (H100SP29C00). Notably, the update is approaching via OTA and may take 2-3 days to reach all users.

Speaking of the changelog, the fresh firmware mainly aims to improve the stability aspects of the device. It optimizes the functioning and makes the internal system reliant and more durable.

On the flip side, the update resolves some irritating issues that have been affecting the performance of the smart speaker for a long time. As a result, this firmware installation will enhance the overall user experience.

Advertisement

Hence, if you are a Huawei Sound Joy owner, we recommend installing this update as soon as it appears on the notification panel.

Full Changelog:

  • Build Number: HarmonyOS 2.1.0.30

Changes:

  • Improved device stability
  • Fixed some known issues

Points to Remember:

You can install the update by navigating to the Huawei AI Life App on your smartphone. Further, tap on the Sound Joy card and then Firmware Updates. However, before heading for the downloading steps, take the following measures:

  • Battery level should be above 20%
  • The Bluetooth connection between your phone and speakers must be stable
  • In case the installation fails, try again

Huawei Sound Joy

Huawei Sound Joy is the ultimate pack of immersive audio quality. It is Huawei’s first portable speaker with Devialet technology and exhibits a four-speaker unit system.

In terms of layout, the device holds a cylindrical structure with 202 mm height, and 73 mm diameter, and weighs up to 680 grams. It also supports Bluetooth 5.2 and high-end audio codecs such as AAC and SBC.

The speakers pack a huge battery of 8800mAh and offer a playback time of 26 hours. Besides, it bears a 40W fast charger that can charge the device in just 10 minutes.

[Source]

Advertisement
Continue Reading

HarmonyOS

Broadcom BK7235 processor combines with OpenHarmony

Published

on

OpenHarmony Broadcom BK7235 processor

Broadcom Integration Group recently launched a new BK7235 high-end processor and merged it with the OpenHarmony operating system. The chipset aims to enhance IoT connectivity and bring new improvements in the security aspects.

OpenHarmony is well-known for its compatible connections as well as all-scenario operations. It contains an advanced and tech-pack connectivity system that can support all smart devices effectively.

And to make these connections more reliable, Broadcom group has integrated a BK7235 processor in the OpenHarmony framework. Accordingly, it will facilitate the operating system with rich storage and a robust security structure.

On the other hand, it can provide numerous immediate options for commercial purposes. For instance, lightweight audio quality, new upgrades for functions, controlling management, and more.

Advertisement

Let’s understand the high-end BK7235 processor in detail.

BK7235 MCU Chipset – Two Versions

Broadcom BK7235 chip is an MCU (micro-controller unit). It has two variants: single-core and dual-core. The single-core chip installs a 656KB RAM and supports 26 GPIOs (General Purpose Input/Output), and a 5V direct power supply. It is appropriate for 5V smart home gadgets.

Meanwhile, the BK7235 dual-core version packs 800KB RAM and a high-speed 8MB Dynamic RAM (DRAM). Further, it supports single and multiple cloud connections, 48 GPIOs, dual microphones, a CIS camera, 16-bit LCD, and significant coding functions.

BK7235 processor – efficiency

Both versions use a self-developed security infrastructure to offer tough security protection for the entire operating system. Aside from the regular security components, the processor also equips the powerful P-384 encryption protocol to access verified algorithms.

Advertisement

It’s worth mentioning that the respective chipset has also qualified for the PSA level 1 safety certification. Hence, it will make useful changes in the OpenHarmony operating system.

Moreover, the processor easily operates and manages common, commercial, and authorized passwords. For instance AES, RSA, ECC, SM2, SM3, SM4, and more. Together, these qualities will help in providing efficient security protection to the IoT and other network devices.

In addition to the magnificent safety functions, the BK7235 chip is eligible for Wi-Fi 6, and Bluetooth 5.2, and supports various third-party network connections. Hence, the chipset could prove a beneficial implementation for the OpenHarmony community.

OpenHarmony Broadcom BK7235 processor

(Source)

Advertisement
Continue Reading

HarmonyOS

Huawei MatePad Pro 10.8 gets SuperHub feature with HarmonyOS 3 public beta

Published

on

Huawei MatePad Pro 12.6

Huawei MatePad Pro 10.8 tablets are grabbing the HarmonyOS 3.0 public beta update along with the smart SuperHub feature. The update also optimizes the system’s stability and improves the overall functioning of the gadget.

According to the information, the latest update for the MatePad Pro 10.8 tablet users is arriving with HarmonyOS 3.0.0.163 build version and 1.0GB package size. It is recommended to opt for a standard Wi-Fi network for installing the new firmware.

Moreover, the update is only compatible with the following models:

  • Huawei MatePad Pro 10.8 (MRX-AL09)
  • Huawei MatePad Pro 10.8 (MRX-AL19)
  • Huawei MatePad Pro 10.8 (MRX-W09)
  • Huawei MatePad Pro 10.8 (MRX-W19)
  • Huawei MatePad Pro 10.8 (MRX-W29)
  • Huawei MatePad Pro 10.8 (MRX-W39)
  • Huawei MatePad Pro 5G 10.8 (MRX-AN19)

Speaking of the additions, the fresh update brings the unique SuperHub feature for the Huawei MatePad Pro 10.8 tablets. Eventually, this section allows you to easily share various content between different apps and devices.

On the other hand, you can simply drag and drop pictures, texts, documents, links, and more from one app to the SuperHub Transfer feature. Further, the update adds a new mouse pointer icon. This allows you to adjust the speed of the mouse pointer on the tablet.

Advertisement

What else? Well, the new update integrates the latest November 2022 security patch. As a result, you will experience a reliable and more responsive system after feeding the new update to your tablet.

HarmonyOS 3.0 public beta changelog

New Additions:

  • Added the SuperHub (Smart Transfer feature) which enables you to share various content between apps and devices. Just long press and drag pictures, texts, links, and more to SuperHub.
  • Added a new mouse pointer icon that allows adjusting the speed of the mouse pointer.

Security:

  • Incorporates the November 2022 security patch to enhance the system security

You can install the latest update through the Settings menu. However, make sure that you have HarmonyOS 3.0.0.127 as the baseline version. Also, take a backup of the device beforehand so that the new update may not harm your data.

[Source]

Advertisement
Continue Reading