Huawei is rolling out September 2021 firmware update for the Huawei Watch GT 2 46mm version. The Watch GT 2 September 2021 firmware has version 220.127.116.11. The changelog of this software rollout brings system stability optimizations for better wearable performance and to prepare for maximum use cases.
As mentioned above, this software release is limited to the Chinese market but the global may likely make its way to the global users. If you want to check for the latest firmware, please follow the instructions below.
First, you need to connect the Watch with the corresponding phone via Huawei Health App. Open the app and select your connected Watch device, open detail, and choose firmware Watch GT 2 September 2021 firmware, then follow the onscreen instructions. Check the notes linked below.
It’s recommended to keep the power level above 20% before initiating the upgrade process. Keep sufficient storage. Update your Huawei Health app to the latest version before moving on with the upgrade process. Complete the download process to begin the installation.
Do not operate the Watch GT 2 during the installation progress, as it may disturb the installation process.
Last month, the Huawei Watch GT 2 received firmware 18.104.22.168 update that also optimized the system stability. This update also expanded for the global models in August, the update brings the same changelog.
Huawei Watch GT 2 Closed Beta:
Earlier this week, Huawei announced a Huawei Watch GT 2 closed beta program for Chinese consumers. The announcement also includes information, suggesting that the upcoming Huawei Watch GT 2 beta activity will usher in new features for these wearable users. However, there’s more information that’s still required.
Huawei wrote that the Huawei Watch GT 2 46mm version has been upgraded. New sporty & outdoor, smarter, safer, new features, and user experience are waiting for you to announce. Eligible users can register and be the first to experience the new features of the new version.
Check more information about this recruitment linked below.
Huawei P30 Lite is receiving April 2022 security update (EMUI 10.0)
Huawei P30 Lite is testing EMUI 12 software update under the beta testing program and soon, the company will begin sending this update via stable channels. In the meantime, Huawei P30 Lite users are receiving April 2022 EMUI security update, which enhances their phone’s software security.
Huawei is sending April 2022 EMUI 10.0.0.562 update for P30 Lite consumers around the globe but you can go to the Settings to get this update on your Huawei device. To do that, open Settings, then head towards System & updates > from here you need to tap on Software updates and follow the on-screen instructions. Alternatively, you can also get this software update via the My Huawei app and then update services.
Aside from the EMUI 10.0 users, P30 Lite consumers can also participate in the EMUI 12.0 beta program, which allows them to test the latest features ahead of the official and full release. EMUI 12 installs new functionalities such as Control Panel, Notification Panel, improved performance, better task handling as well a new user interface that is intriguing from its core.
Still, Huawei is working to bring this software update to all of the P30 Lite consumers but we’ll have to wait to see that happen.
This update improves system security with security patches.
- Integrates security patches released in April 2022 for improved system security.
Thanks to the tipster – Ben for this amazing tip
Huawei P30 Lite:
Huawei P30 Lite equips a triple rear camera system including a 24MP+8MP+2MP Triple rear camera with ultra-wide-angle f/1.8 aperture, f/2.4 aperture, and f/2.4 aperture. On the front side, this phone brings a 32MP camera with an AI selfie f/2.0 aperture.
The phone sports a 6.15-inch FHD multi-touch capacitive touchscreen with 2312 x 1080 pixels resolution. The phone has 4GB of RAM and sufficient storage that could expand further with the help of a microSD card. This phone is packed with a 3340mAh battery that could recharge with an 18W superfast charger.
Huawei Y7a getting EMUI 10.1.1.246 April 2022 update
Huawei Y7a smartphone is now receiving new security patches released in April. The phone has currently run EMUI 10.1 but the company has not confirmed EMUI 12 slot for this device in the current scenarios. Meanwhile, it’s recommended for you install the latest Huawei Y7a EMUI 10.1.1.246 update to get enhanced security features.
As we look into the changelog, Huawei Y7a April 2022 update has EMUI version 10.1.1.246 and it could be downloaded from the Update settings. Once loaded, the software update will install the latest software improvements and your phone will take some time to get them on board.
As of now, the software update is released in batches and may take some time to reach your Huawei Y7a device. However, we suggest you keep an eye on the update section to download it.
Huawei Y7a comes with a 6.67-inch FHD+ display and a 5000mAh battery that could recharge with 22.5W super-fast charging technology. The phone has a side-mounted fingerprint scanner that could unlock your phone in an instant. ON the other hand, it ensures sufficient processing and storage thanks to the 4GB RAM + 64GB/128GB storage combination.
Huawei Y7a is powered by Kirin 710A processor with octa-core chip architecture including 4 x Cortex-A73 Based 2.0 GHz + 4 x Cortex-A53 Based 1.7 GHz alongside Mali G51-MP4 GPU. The phone packs with EMUI 10.1.
May 2022 EMUI 12 security update rollout begins
We’re in the middle of May and Huawei continuously rolling out EMUI 12 software upgrades for old Huawei smartphones. While the rollout of EMUI 12 goes steady, the tech firm is simultaneously sending new security updates for the devices that have already been upgraded with this new EMUI version.
According to the information coming from Huaweiblog, Huawei has started sending the May 2022 security update for Huawei Mate 40 Pro smartphone in the global market running EMUI 12 software. This is a new development that will surely improve the user experience of the Huawei Mate 40 Pro smartphone and enhance its phone security.
Talking about the software version, Huawei Mate 40 Pro May 2022 security update comes with EMUI version 22.214.171.1246 and an update package size of 320 megabytes. However, the update size and package version may vary depending on the market.
You can check the changelog of this update mentioned below.
This update improves system security with security patches.
- Integrates security patches released in May 2022 for improved system security.
How to update your phone with May 2022 EMUI security update
To download this software update you need to open Settings > then head towards System & updates > from here you can tap on Software updates and here you can download and install the latest firmware on your Huawei Mate 40 Pro.
However, you should know that you need to wait for a few minutes to let your phone check and install the latest available firmware version.
Last month, Huawei sent April 2022 security update for this flagship model. However, there have been no other changes found in the changelog. This update had also improved the system stability in certain scenarios to run this phone smoother as compared to the last firmware.
Why you should install this update?
The update will give you better system security and safe keep your data from malicious software