This month is about to end and the company is sending the September 2021 security patch update for the Huawei P40 series in the global market. The Phone comes with a powerful triple, quad, and Penta camera system powered by Leica imaging as well as task processing capability.
Huawei P40 devices have already been upgraded with HarmonyOS 2.0 operating system in China. The users of this lineup are enjoying the latest features prowess on the ground. However, the global models still run EMUI 11, and there’s no confirmation about the HarmonyOS rollout for the global models.
For the time being, Huaweiblog reports that the Huawei P40, P40 Pro, P40 Pro Plus September 2021 security update comes with EMUI 11 version 18.104.22.168 and an update package size of 297 megabytes. The EMUI version may vary depending on the market as well as the region.
There are a few things that you know before upgrading to the latest software update. First maintain enough storage on your device, back up important data to prevent any important data loss. Make sure to use a stable internet connection while downloading the update package on your smartphone.
(image source – Huaweiblog)
How to check for update:
Open Settings and click on System & Updates, then open Software update. Tap on Check for updates option, if an update appears then click Download and install. After installation reboot the device.
Huawei P40 Pro:
Huawei P40 Pro sports a 6.58-inch curved edge OLED display with 2640 x 1200 pixel resolutions and a 90Hz refresh rate. It is powered by the Kirin 990 5G octa-core processor with Mali-G76 GPU.
In terms of software, it comes pre-packed with EMUI 10.1 based on Android 10. The device comes with 8GB RAM and 256GB of internal memory option. It packs a 4200mAh battery with 40W fast charging. Moreover, the P40 Pro equips a quad-camera setup with 50MP wide-angle lens, a 40MP ultra-wide camera, a 12MP telephoto camera, and a 3D depth-sensing camera. In the front, it has a 32MP camera for selfies.
Thanks to the tipster – Dimitris
5 year old Huawei mid-ranger gets new EMUI features
Huawei is rolling out new software updates for one of its 5 year old mid-ranger with a number of new features. It’s good to see those old smartphones are not completely cut off from new optimizations and Huawei is still sending new tweaks.
The 5 year mid-ranger that we’re talking about is the Huawei Enjoy 7s. And it runs EMUI 9.1. Alongside, Huawei is sharing a new software update for another veteran, Huawei Enjoy 8 Plus, also known as Huawei Y9 2018.
These two phones are well received by Huawei consumers and now getting new add-ons. According to the changelog, Huawei is sending EMUI 22.214.171.124 (from EMUI 126.96.36.199) for the following models:
- Enjoy 7S FIG-AL00
- Enjoy 7S FIG-AL10
- Enjoy 7S FIG-TL00
- Enjoy 7S FIG-TL10
On the other hand, Huawei Enjoy 8 Plus getting EMUI 188.8.131.52 (from EMUI 184.108.40.206) for the below-mentioned models:
- Enjoy 8 Plus FLA-AL10
- Enjoy 8 Plus FLA-AL20
- Enjoy 8 Plus FLA-TL10
What does it bring?
The changelog reveals that there are new changes in the application section such as the new Petal Light Tour app. Users will have to tap on the app icon to download the app on their smartphones.
You should know that the app download will begin only if you tap the app icon. Furthermore, this two Huawei mid-ranger are getting their EMUI security features improved with a February 2022 security patch.
Previously, Huawei Enjoy 9e received a similar update for a better user experience. However, we cannot configure whether the same firmware is planned to rollout for the global variants.
If it happens, then do inform us via Screenshot@huaweicentral.com. Until then check the full changelog mentioned below and keep an eye on your phone’s firmware section.
Added a quick download icon for the Petal Light Tour app, click it to download and use it directly.
integrates February 2022 security patches to enhance system security Information about the security content of Huawei software updates.
Huawei P30 Lite November 2022 update rolling out
Huawei is rolling out the November 2022 software update for the P30 lite smartphone in the global market. On the other hand, the company is sending this software update to improve the phone’s security aspect.
For now, the update has been spotted in the European region but may soon reach other markets. It’s come to know that the Huawei P30 Lite November 2022 software update has EMUI version 220.127.116.11 and a package size of over 250 megabytes.
You should know that this software is rolling out in batches. So, we suggest you keep on looking in the software update section.
The changelog doesn’t include any other improvements for the smartphone than the security patch. However, P30 lite users are anticipating EMUI 13 but Huawei has not revealed rollout dates for past devices.
Hence, the phone currently, runs EMUI 12 with a number of new features as well as the user interface. However, the P30 lite was stuck on EMUI 10.0 previously. Therefore, it’ll be interesting to see if this phone could get new major upgrades.
If you want to check for new firmware, make sure to open Settings menu > then all you have to do is to scroll down and tap on System & updates > from here tap on Software updates and then tap CHECK FOR UPDATES button on the bottom side of the screen.
The phone will take a few minutes to connect to the server and check for the latest available firmware. If it fails, then do check the firmware via the My Huawei app.
Huawei P30 lite sports a 6.15-inch display with FHD+ resolution, the phone is powered by Kirin 710 chipset. It has a 24MP triple rear camera system and there’s a large 32MP selfie camera.
The phone is packed with a 3340 mAh battery that could recharge with an 18W fast charger.
Below you can check participate in the poll and spark a conversation on your Huawei P30 lite software update status.
Received November 2022 update for your Huawei P30 lite?
— HC Newsroom (@HCNewsroom) December 8, 2022
(via – Huaweiailesi)
Huawei releases December 2022 EMUI patch details
Huawei has released December 2022 EMUI security patch details for global smartphones. This update will soon start to rollout for the eligible models on top of new OTA software. Huawei is currently rolling out November 2022 security patch for flagship and mid-range devices. These phones will soon promote to a new firmware version.
Meanwhile, Huawei smartphone users are waiting for a new major software update. However, Huawei has not revealed any details about EMUI 13 or its rollout. As December could bring news about EMUI 13 that is much awaited.
Huawei releases these software updates in quarterly and monthly time spans. And aims to improve the phone’s stability, features, and performance on EMUI 12.0.1, EMUI 12.0.0, and EMUI 11.0.1.
According to the patch details, Huawei December 2022 EMUI patch fixes 17 high-level CVEs, 2 medium CVEs, and no new CVEs found in the low-level. On the other hand, the patches also apply fixes for several other issues found in the last build version.
Currently, we’ve not spotted December 2022 security patch rollout. However, you should grab this rollout as soon as it appears on your Huawei smartphone.
Below you can check all of the bugs and viruses fixed in the latest EMUI security bulletin.
CVE stands for Common Vulnerabilities and Exposures.
- CVE-2022-20414, CVE-2022-20441, CVE-2022-20445, CVE-2022-20446, CVE-2022-20448, CVE-2022-20450, CVE-2022-20451, CVE-2022-20453, CVE-2022-20454, CVE-2022-20462, CVE-2022-20463, CVE-2022-20465, CVE-2022-2209, CVE-2022-25724, CVE-2022-25743, CVE-2021-1050, CVE-2022-25741
- CVE-2022-20280, CVE-2022-20338
Already included in previous updates: CVE-2022-25748, CVE-2022-20394, CVE-2021-39673, CVE-2022-20410, CVE-2022-20351, CVE-2022-26472, CVE-2022-22078.
You can check for the latest software update, open Settings > tap on System & updates and then tap on Software updates and tap on CHECK FOR UPDATES. Afterward, the phone will check for the latest firmware rollout. However, it may take some time to release software updates for specific devices.
Hence, we suggest you also request new firmware via the My Huawei app and navigate to the Updates section.