Connect with us

Wearables

Huawei FreeBuds Pro 2 launched with 47db noise cancellation, light design, beautiful new color and more

Published

on

huawei freebuds pro 2 launched

On June 23, 2022, Huawei launched FreeBuds Pro 2 earbuds in the global market. The company has unveiled this new generation of FreeBuds Pro headphones with a stylish design and immersive noise cancellation that compounds a beautiful audio quality for your ears.

Let’s tour the Huawei FreeBuds Pro 2 and learn more about its new features.

Similar to the first-gen FreeBuds Pro, the Huawei FreeBuds Pro 2 has a charging case that expands at 47.5 × 67.9 × 24.5 and weighs around 52.1g without carrying the earphones (60g first gen). On the other hand, each piece of the earbuds has 5.9g of weight, which is less than its predecessor (6.1g each). The earbuds fit and pull out perfectly and their safety is ensured by the magnets inside the charging case.

huawei freebuds pro 2

Huawei FreeBuds Pro 2 has a range of 14 Hz to 40 kHz, it supports Bluetooth 5.2 for better connectivity along with LDAC, AAC, and SBC codecs, three microphones, and a 4-magnet 11mm dynamic transducer.

Advertisement

Huawei FreeBuds Pro 2 is launched with an audio quality that is derived from the French sound technology maker – Devialet. To further improve the audio, the hardware comprises a special micro planar diaphragm for treble, HWA, and Hi-Res Wireless Dual HD certifications with a transmission speed up to 990 kb/s, water, and dust resistance according to the IP54 standard (the case is not water-resistant, however), the low response of 140 ms or active noise suppression with VACC and artificial intelligence algorithms.

huawei freebuds pro 2 launched

These new earbuds can support up to 47dB of notice cancellation, which was 40db in the previous generation. This is also a new achievement for Huawei to ramp up noise cancellation on such a scale, which was available before.

The Noise Cancellation feature supports 3 modes – general mode, cozy mode, and ultra mode. For outdoor activities, you will get support from awareness mode.

The Huawei FreeBuds Pro 2 comes with the same controls that support press controls with once, twice, three times, and long-press to activate features. Furthermore, you can swipe up and down to navigate the playback.

Advertisement

Coming towards compatibility, Huawei FreeBuds Pro 2 is designed to work on both Android and HarmonyOS software.

huawei freebuds pro 2

Talking about the battery, the FreeBuds Pro doesn’t compromise your user experience as it boasts 4 hours of playback with ANC and 6.5 hours without ANC. On the other hand, the playback time could be extended up to 18 hours with the help of a charging case with ANC and a whopping 30 hours without ANC.

You can recharge the charging case with the help of a USB-C head cable, which could charge at a rapid speed.

Price and Availability:

Huawei FreeBuds Pro 2 is launched in three colors Silver Frost, Ceramic White, and the new edition – Silver Blue, which looks absolutely gorgeous.

Advertisement

Huawei FreeBuds Pro 2 is priced at CZK 4999 (201 EUR, 1423 CNY, 173 GBP, 11608 PHP, 796 SAR).

Huawei FreeBuds Pro 2 will start sales from July 11 in Europe, while the pre-sale of these amazing earbuds will begin tomorrow onwards along with free gifts (Huawei Band 7) and offers.

We’ll keep you posted on other markets’ listing as it appears.

Advertisement

Most of Deng Li's smartphones are from the Huawei ecosystem and his first Huawei phone was Ascend Mate 2 (4G). As a tech enthusiast, he keeps exploring new technologies and inspects them closely. Apart from the technology world, he takes care of his garden.

HarmonyOS

Huawei HarmonyOS 3 eligible smartwatches [List]

Published

on

HarmonyOS 3 Huawei smartwatches

HarmonyOS 3 is a major upgrade over HarmonyOS 2 and it’s available for not only smartphones and tablets but also for Huawei smartwatches. Yes! There are a bunch of smartwatches and we’ll get to know them in the article below.

Currently, Huawei is testing HarmonyOS 3 for Watch 3 and GT 3 series smartwatches in China. On the other hand, some of the watches on the global market have also received a similar upgrade but these are quite a few.

HarmonyOS 3 eligible Huawei smartwatches:

  • Huawei Watch 3
  • Huawei Watch 3 Pro
  • Huawei Watch GT 3 Pro 43mm
  • Huawei Watch GT 3 Pro 46mm
  • Huawei Watch GT 3 Porsche Design
  • Huawei Watch GT 2022 Collector’s Edition
  • Huawei Watch GT Runner
  • Huawei Watch D (to be announced)

Huawei Watch 3 and Watch 3 Pro were the first smartwatches to come with pre-installed HarmonyOS 2 software. Huawei Watch GT 3 series followed the trend and the company has brought them with HarmonyOS 2.1.

Huawei Watch GT Runner is something unique and it is specifically designed for athletes and trackers. However, everyone could take benefit from its productive features.

Advertisement

Meanwhile, Huawei has not confirmed HarmonyOS 3 upgrade for the Watch D blood pressure smart wearable, as it ships with HarmonyOS 2.

HarmonyOS 3 Huawei smartwatches

HarmonyOS 3 features for Smartwatches:

Professional Sports functions
  • The first HarmonyOS 3.0 beta update brings an automated pause switch that can stop or resume the exercise and other workouts according to your exercise status. You can access the feature by visiting Settings > Exercise Settings > Automatic Pause.
  • The device will also be able to support sports linkage to control the pause, end, and continue the course over the smartphone. Besides, it can connect to other Huawei devices and can use the S-TAG connection to sense posture, cycling, running, and more.
  • On the flip side, the screen will remain enabled till you are doing exercise. As a result, you can easily check on real-time exercise details. Next, you can explore, connect, and utilize sports equipment with the all-new Sports Health Equipment Management. To access it, navigate to Settings > More Connections > Sports Health Equipment Management.
Health Management
  • HarmonyOS 3.0 beta firmware brings the new altitude care app that can observe and identify the risk of altitude sickness. Further, it is capable of providing scientific advice to the individual. For instance, breathing, training guidance, and so on.
Smart Travel
  • Ultimately, the firmware enables the BYD NFC (Near Field Communication) car key support to even use in ultra-long battery life mode. Hence, no more worries of great power consumption with using vehicle-related functions.
Convenient Life
  • Automated enter and exit sleep mode: Additions of a new ‘Automated enter and exit sleep mode’ tab in the sleep application. When enabled, the watch will automatically enter and exit the sleep mode as per your sleep status. Further, it also supports custom durations. You can enable it by Sleep app > Sleep Settings.
  • Mute Collaboration Function: You can now mute either the watch or smartphone while answering a Bluetooth call.
  • You can also switch audio devices instantly during eSIM calls through Smart Voice control settings.
Super Linkage
  • With a single pull-down, you can now interconnect or collaborate between different smartwatches smartphones, headsets, smart screens, and fitness equipment. Moreover, you can remotely access the handset for snapshots, operating music, and more.
Advanced Dial
  • Mountain Cloud Sea effect: Gives a three-dimensional look to the dial field.
  • Kaleidoscope Dial: Let you select your own pic to create a personalized dial. You can also rotate the crown to see the kaleidoscope effect.
  • New Watch Faces: Now you have the access to install your favorite face watch directly from the watch.
Playing Skills

New Playing Skill game application that offers multiple watch usage tips and helps you to understand the new skill of the wearable.

System

Optimizes and improves the Bluetooth connection and lets you enjoy a new status icon

Continue Reading

Wearables

Huawei launched Watch GT 3 series WeChat watch version with new features

Published

on

Huawei Watch GT 3 WeChat version launched

Huawei fans! Are your eyes searching for a fantastic wearable device? If yes, then here is a piece of good news for you. Today, Huawei has officially launched the Watch GT 3 WeChat version with some dynamic and useful features.

With the onset of this day, we found an appealing post on Huawei’s official Weibo channel. The company has shared an interesting video showcasing the new Huawei Watch GT 3 WeChat edition with its impressive features.

The Chinese tech giant initiated the Watch GT 3 series WeChat watch version recruitment in July this year. Thereafter, the company began pushing off limited WeChat features to the respective watch series through the medium of regular updates.

Finally, the company has launched an all-new Huawei Watch GT 3 WeChat watch version for its consumers. Unlike the other variants, the newly-launched version brings a full bag of WeChat features and functions for users.

Advertisement

Huawei Watch GT 3 WeChat version launched

WeChat Watch Version:

Using a Bluetooth connection, Huawei Watch GT 3 users can easily operate the WeChat app and use its function without even employing their phones. Besides, you can manage the text and voice messages by simply raising your hands and facing the watch towards you.

Further, you also gain the ability to set voice or video call reminders on WeChat. At the same time, you get access to WeChat Pay to perform several transactions in a go! Now quick replies to voice and text will always remain at your fingertips.

However, users must note that the new version will only support Android 9.0 and HarmonyOS 2.0 and newer software. Aside, the WeChat App on your phone must be running on the 8.0.24 version or above. And there is no space for the iOS system at the time.

Talking about the WeChat watch version, it currently supports the Huawei Watch GT 3 Pro, Huawei Watch GT 3 Porsche Design, Huawei Watch GT 3, Huawei Watch GT Runner, and the Huawei Watch GT 2022 Collection.

Advertisement

Huawei Watch 3 Series is next!

In this WeChat watch version queue, Huawei Watch 3 series is next. The company has mentioned that the respective watch with the WeChat version has entered the internal testing phase. And within a few days, the upgrade will be successful.

Huawei Watch GT 3 WeChat version launched

|| Source ||

Continue Reading

Updates

Huawei sends another Watch 3 Pro update in the global market [September 2022]

Published

on

watch 3 pro september 2022 update

There are a lot of updates that have been rolled out this month for the Huawei Watch 3 and Watch GT 3 series. In the latest edition, Huawei released another update for the Watch 3 Pro for global users in the month of September.

According to Huaweiblog, Huawei is sending the second September 2022 update for Watch 3 Pro with new optimizations for location speed and accuracy of outdoor training routes. It’s quite helpful and required optimization for the Watch 3 Pro.

For your information, Huawei Watch 3 and Watch 3 Pro are the first smartwatches to come with HarmonyOS 2 operating system. With the unveiling of HarmonyOS 3 in July, the company has started testing these watches with the latest operating system version.

As for now, the global version of the watch currently runs HarmonyOS 2.1 and may soon be available with HarmonyOS 3.

Advertisement

watch 3 pro september 2022 update

Changelog:

This update optimizes the location speed and accuracy of outdoor training routes for specific scenarios.

Optimizations:

  • Optimizes location speed and accuracy of outdoor training routes for specific scenarios.

Huawei Watch 3 Pro users can download this software by the Huawei Health app, from here select the smartwatch, and navigate toward the firmware update section. Once downloaded, the update package will take some time to install on your smartwatch, as it’ll restart the smartwatch upon successful installation.

Notes:

Before you begin, we suggest you sufficiently charge your smartwatch and keep it connected to the network.

Advertisement
Continue Reading