Connect with us

HarmonyOS Update

Camera update rolling out Huawei Enjoy and Maimang devices (HM OS 2 beta)

Published

on

Huawei Enjoy 20 series

Following the initial rollout, Huawei is rolling out the HM OS 2 (HarmonyOS 2) software update for the China-specific devices including the Huawei Enjoy and Maimang series devices.

These phones took part in the third phase HarmonyOS 2.0 beta, which was started in late June. Since then, the selected beta tester getting HM OS 2 beta software updates to experience the new features and provide better feedback.

Adapting models:

  • Huawei Enjoy 20 Pro
  • Huawei Enjoy Z 5G
  • Huawei Enjoy 20 Plus
  • Huawei Maimang 9

New software improvements:

With the latest HarmonyOS 2 update, Huawei is rolling out improvements for some important aspects of the smartphones including camera effect, and Celia Voice Assistant to provide an optimized user experience.

If you want to send us Tips, Update Screenshots, or a Message? connect with us here:

  • Screenshots@huaweicentral.com
  • Tips@huaweicentral.com
  • Message us on Twitter

Huawei Enjoy 20 Series

New Version:

Huawei Enjoy smartphones and Maimang 9 beta testers receiving HarmonyOS 2.0 version 2.0.0.145 upgraded from 2.0.0.125 with an update size of 1.14GB.

Advertisement

Note: All of these devices run HarmonyOS 2.0 beta or stable builds, and this update is not related to the global models.

Changelog:

  • Camera: Optimizes the camera shooting effect in some scenarios.
  • Celia Voice Assistant: Optimize the experience of using Celia voice assistance in some scenarios.
  • Apps: Optimizes some applications.

HarmonyOS 2 beta camera update

First HarmonyOS 2 update:

HarmonyOS 2.0 is a new operating system that comes with a new user interface including a new home screen, control panel, service center, HarmonyOS font, task manager, better security, and more to provide a new user experience.

IMPORTANT NOTES:

  • Users are compulsory to download and upgrade to the required EMUI version to receive the beta push.
  • During the closed beta test, users are suggested to enable the user experience improvement plan (path: Settings-System and Update-User Experience Improvement Plan) to facilitate the developers to perform system and application analysis, fault diagnosis, etc., and continue to improve the version quality.
  • This upgrade will not delete your data, but it is recommended that users take a backup of all of the important data to a PC or the cloud before the update process begins and confirm that the backup content is complete, otherwise it may cause a risk of data loss.
  • Some third-party apps may not be compatible with HarmonyOS, the app may not work as usual after the update. It is recommended that you try to update the apps on the latest version from AppGallery.
  • After the upgrade process is completed, the phone may heat up, get cold or perform slow charging. This is caused by the self-optimization and adaptation process performed by the system following the upgrade.
  • Following the upgrade, rest assured that it will recover by itself after a period of time. It is recommended that you charge for more than 1 hour in your free time. During the charging period, the system will perform optimization to ensure that the mobile application is quickly adapted.
  • After the update, the home screen may get unorganized, please adjust it manually.
  • This update procedure requires to vacate at least 10GB of free space for the installation package, which will automatically be deleted after the successful installation.

Also, check:

Battery improvement update rolling out for over a dozen of Huawei phones and tablets

Advertisement

HarmonyOS Update

September 2021 update rolling out for these 7 Huawei devices

Published

on

Huawei 7 devices September 2021 update

We’re now in October and Huawei is preparing to unveil a number of new smart products this month. However, the software rollout continues as usual. In the latest episode, the Chinese tech maker is seeding the September 2021 security update for 7 Huawei devices that are running its latest operating system.

According to the information, Huawei is rolling out September 2021 security update for 7 Huawei devices including – Enjoy 20 Plus 5G, Maimang 8, Enjoy 9S, Enjoy Z 5G, Enjoy 20 Pro, and Maimang 9 5G, and the Huawei P40 5G.

To be mentioned, these 8 devices run HarmonyOS 2.0 operating system. Some of the models are still under beta testing and a few of them just participated in the closed testing environment.

Let’s check the rollout details and changelog below.

Advertisement

Huawei 7 devices September 2021 update

September 2021 Update Eligible Models:

  1. Enjoy 20 Plus 5G – (FRL-AN00a/TN00)
  2. Maimang 8 – (POT-AL00)
  3. Enjoy 9S – (POT-Tl00a)
  4. Enjoy Z 5G – (DVC-AN00)
  5. Enjoy 20 Pro 5G – (DVC-AN20/TN20)
  6. Maimang 9 5G – (TNN-AN00)
  7. P40 5G – (ANA-AN00/TN00)

Time dive into Changes:

Huawei Enjoy 20 Plus 5G, Enjoy 20 Pro, Enjoy Z 5G, and Maimang 9 5G receiving HarmonyOS 2.0 version 2.0.0.205. This software build brings a new size adjustment feature for home screen icons and users can access it via Settings, Home screen and wallpaper, Home screen settings, and then open icon size option to access.

This update also brings a new security patch released in the month of September 2021 for an improved system and ensures that your phone runs safe and secure.

On the other hand, Huawei Maimang 8 and Enjoy 9S getting new software with HarmonyOS 2.0 version 2.0.0.187. This update brings important improvements for the system stability to improve the overall user experience and performance.

Huawei September 2021 update

Huawei P40:

Among these, Huawei is also sending a new software version – 2.0.0.206 for the HarmonyOS powered P40 5G devices. The rollout is conducted under the beta mode and brings a number of new features. The changelog shows to include a new task center feature, a cross-device task management function.

In the task center (swipe from the bottom of the screen for a short pause to enter), you can view and use the historical tasks of the same WiFi network and Huawei ID device (requires support for the task center).

Advertisement

This update also adds a new Celia Keyboard app, as well as optimizes the touch as well volume adjustment feature in the accessibility section. Furthermore, this update optimizes the system stability for power consumption in some situations, which could save an extra amount of battery for the device users.

Continue Reading

HarmonyOS Update

Honor 30 and V30 series getting .168 update with new HarmonyOS features

Published

on

Honor 30 Pro Plus

HarmonyOS 2.0 version 2.0.0.168 rolling out for Honor 30 and Honor V30 series phones upgrading from 2.0.0.165. This firmware has new features and a number of better software improvements for various aspects of the software system.

According to the changelog, the latest .168 update for Honor 30 Pro, 30 Pro+, Honor V30, and V30 Pro smartphones comes with a new multi-camera mode that allows you to shoot photographs from different devices using various perspectives.

The update also improves the camera by fixes a certain watermark issue, there are fixes for control panel icons’ abnormal appearance. Furthermore, the .168 update package brings September 2021 security patches for the Honor 30 and V30 series devices.

HarmonyOS 2.0 version .168 eligible devices:

  • Honor V30 (OXF-AN00)
  • Honor V30 Pro (OXF-AN10)
  • Honor 30 Pro (EBG-AN00)
  • Honor 30 Pro (EBG-TN00)
  • Honor 30 Pro+ (EBG-AN10)

HarmonyOS 2.0.0.168 changelog:

  • Camera: Added multi-camera mode. During shooting, you can choose a HarmonyOS 2 mobile phone or tablet (with multi-camera mode required) in the same WLAN network as the lens to take wonderful pictures from multiple angles and realize remote control.
  • Camera: Fix the problem that the camera watermark cannot be automatically rotated in some situations.
  • Display: Fix the problem that some icons in the control panel are not displayed
  • Security: Integrates the September 2021 security patch to enhance the security of the mobile phone system.

Honor 30 168 update

How to update:

To download this update manually, go to Settings then System & updates, then open Software update, from here select Check for updates. If an update is available it’ll pop up on your phone and an option of Download and install will appear. Press the option and start to download.

Advertisement

Alternatively, you can also request software updates through the My Huawei app. To do this, open the My Huawei app, tap on the update, then select Check for updates, and then download and install.

However, there are a few things that you need to know before you proceed towards the update procedure. First, it’s recommended that you need to keep sufficient storage, keep an optimum battery level. Please wait while the update installs.

Continue Reading

HarmonyOS Update

Home screen icon size customization feature rolling out for Huawei P40 (CN)

Published

on

HarmonyOS

Huawei P40 series stands as one of the first devices that participated in the HarmonyOS 2.0 developer beta activity since December last year. These phones have received consecutive beta upgrades before HarmonyOS 2.0 stable update. On the other hand, their global siblings are still running EMUI 11 and awaiting their term to upgrade with the next major software rollout.

As for now, the Huawei P40 series getting a new software update in China. This Huawei 40 series update comes with HarmonyOS 2.0 version 2.0.0.205 and is currently initiated for the Huawei P40 5G model. Later on, it’ll expand to other P40 series devices.

Huawei P40 Icon Customization Update:

As per the changelog, the latest Huawei P40 series update installs a new Home Screen icon size customization feature. This feature will allow you to customize the size of the icons of the screen according to your preference from various aspects.

The latest Huawei P40 home screen icon size customization option could be found in Settings > Home Screen and Wallpaper > Home Screen settings > Icon Size. This update also adds a new mail app designed for the HarmonyOS service widgets feature.

Advertisement

huawei p40 icon Customization Update

Multi-window bug fixes:

Previously, Huawei P40, P40 Pro, and P40 Pro Plus arranged a new software that fixed multi-window mode, there were some problems with no sound. The update also improves system security.

How to update:

The latest Huawei P40 series can be checked via Settings >> System & updates >> Update >> Check for updates >> Download and install.  However, you must note that the Huawei P40 series device must not be rooted, it has sufficient battery and do not force shut down your phone while the update installs.

Huawei P40 series:

Launched in 2020, the Huawei P40 series comes in three models – P40, P40 Pro, and P40 Pro Plus. The Pro and Pro Plus models have the world’s first quad curved edge display and are powered by Kirin 990 5G chipset. These phones have an excellent camera system that goes up to Penta camera setup.

Advertisement
Continue Reading