Phones
Huawei P50 series may not come with 12GB RAM, Mate 40 RS to continue with 8GB model
A few days ago, it was reported that Huawei will no longer launch the 12GB version of the Huawei Mate 40 RS Porsche Design, as this device will only be produced in an 8GB RAM version.
And, something similar seems to be cooking for the upcoming P50 lineup. According to a Weibo digital blogger, the Huawei P50 series may not feature a 12GB RAM version for at least the start and will be promoted with 8GB of RAM. This could be a piece of very disappointing news for smartphone users with big RAM.
In 2019, Huawei was included in the U.S. entity list, which prohibits the Chinese company from doing business with memory makers such as Samsung and SK Hynix and leads to the shortage of required components such as RAM and storage.
Currently, Huawei has not decided on any launch date for the Huawei P50 series but reports reveal that this device could unveil later this month. Furthermore, due to the shortage of chip supplies, the phone maker likely to launch the 4G variant of the P50 among consumers.
However, a report reveals that this phone will come with a new custom resolution display that is 1224 x 2696 pixels, and a screen body ratio close to 20:9. Furthermore, the phone equips 5G network capabilities.
Also, Read:
Huawei P50 or Nova 9 certified with 66W charger and HarmonyOS 2, launch under preparation
Huawei P60 Series will come with a new camera system and the design is attracting many peoples in the tech community. Now, the anticipation reached new levels for the Huawei P60 series with the revelation of funny back panel cases.
These cases are utilized according to the Huawei P60 series camera and provide a funny experience around the device. For example, Pepsi and Coca-Cola can design is fully creatively and hit directly into our parodical senses.
The other one is that well-known Nokia phone design along with a calculator and Leica camera. These are awesome adaptations for a rear cover.
However, these are the creation of the internet and maybe only available via certain retailers in China, if produced.
Still, there’s a lot more explore about the Huawei P60 series and you can check the entire coverage in our dedicated P60 series section here.
There are just a few days before the launch of the Huawei Mate X3 and the CEO of Huawei Consumer Business Group promoted this upcoming flagship’s weight and thickness and called it a super thin device.
In an exclusive interview published via the Huawei Weibo account, Huawei Mobile CEO told that the new folding phone Mate X3 has achieved both in terms of body thickness and body weight, which is close to the level of an eatable bar.
In addition, the smartphone has an optimized screen, including the reliability of the hinge and drop resistance. Also, Huawei has made these changes without sacrificing the performance of this device.
Huawei is promoting this upcoming foldable device as a big change in the mobile industry. The company last released Mate X2 two years ago and now Huawei is ready to bring a new addition.
A past leak reveals that Huawei Mate X3 will come with a 7.85-inch main foldable display. On the other hand, the phone will help users to operate with a 6.45-inch cover screen once closed.
The Mate X3 is equipped with an 8-inch foldable screen with 16.7 million colors, an OLED flexible panel, a 90Hz refresh rate, a 180 Hz touch sampling rate, and a screen resolution of 2480 x 2200 pixels.
The display is sliced in Mate X3, which could lead to a slim design and support the phone’s lightweight feature. You can read more about the Huawei Mate X3 in the article linked below.
Huawei Mate X3 will bring 7.85 inch main display, smaller than Mate X2
Huawei P60 series will launch on March 23 and it will only bring 4G but there could come with a new 5G case. This addition recently got certified by China Compulsory Certification (3C).
3C certified a new SOYEA Technology device with model SY108-698. The company for this device is well known for its 5G case designed for the Huawei P50 and Mate 50 series. And SY108-698 is likely to be the case for the upcoming Huawei P60 series.
However, we need to know more information about this case, as there are no confirmations available about its launch. Still, we can wait as the Huawei P60 series will require a 5G case in order to provide a 5G experience.
Until then, let’s check the details of the Huawei P50 and Mate 50 Series 5G case.
This 5G case product equips an eSIM chip. Besides, it also consists of a 5G modem and some advanced functions that change a 4G device into 5G.
It weighs 52 grams with a large surface thickness of 3.2mm. Alongside, it has gained a simple and elegant light gray and black color over the leather material.
Users who want to use a 5G phone case need to select the main SIM card first. Then enable the eSIM facility with the main card support. Thereafter, follow the on-screen instructions pop-up by the cover to get 5G network access.
