Huawei Mate 40 Pro is the flagship smartphone of Huawei and running on latest the HarmonyOS 2.0 software system in the Chinese market. But, a Huawei Mate 40 Pro user recently reported that he is facing a Bluetooth connectivity issue while connecting the Huawei FreeBuds Pro.
Accoriding to the user, when he tries to connect Huawei Freebuds Pro to Huawei Mate 40 Pro and another smartphone at the same time, and turns off the noise reduction before one mobile phone is disconnected. This will cause the other to disconnect simultaneously. The Bluetooth will automatically turn off and create issues in connecting the device.
However, this Bluetooth connectivity issue resulted in low noise, as mentioned the left and right earbuds are connected separately at the same time. This appears to be an effective bug experience for users.
Huawei Mate 40 Pro:
Huawei Mate 40 Pro smartphone is currently running on HarmonyOS version 184.108.40.206. The latest update brings a new defect elimination feature in Gallery for the photo editor and smart multi-window mode and optimizations for the device’s system stability.
Along with system improvements, the latest HarmonyOS update brings December 2021 security patch for system security and stability. Sometimes the new firmware brings some issues but they can be resolved,
So, guys, these bugs are really common after updating the system, meanwhile, they flash after some time, or in the next monthly update, the problems will be solved automatically.
Huawei Nova 9 (HarmonyOS) facing heat issue in outdoor condition
Huawei Nova 9 series, is one of the best smartphone lineups of 2021 and some of its users are facing display issue in sun. The smartphone launched with a powerful rear camera setup, big battery, super-fast charging, and a HarmonyOS operating system in China.
Huawei Nova 9: Display issue
Presently, the series is running on the April 2022 HarmonyOS update with build number 220.127.116.11. The update comes with some new additions as well as system stability and security improvements.
Still, post-April 2022 update several consumers have reported that whenever they are using their smartphone under the scorching sun, the Huawei Nova 9 display automatically gets dimmed. Although the user has turned off the auto-brightness adjustment option. Still, the device showed an issue every time he stepped out on a bright sunny day.
Whenever the user enters in the dark the screen automatically gets bright, but after a while, in the hot sun, the screen again gets dim and even more – darker.
If you are also a Huawei Nova 9 series user and dealing with the same situation. Here we have some solutions posted by some users which may help you to get rid of the issue.
After visiting the Huawei nova 9 series phone screen issue, the Huawei moderator suggested that whenever the smartphone’s temperature increases the screen brightness automatically gets dim. Because the device should reduce the brightness appropriately in order to reduce the heat to prevent overheating.
Another user replied that the smartphone’s automatic brightness is too slag, and it is estimated that it is quite far from the standard curve. There is no heat dissipation, and the temperature control is also very cowardly. The increased brightness will not be maintained for a long time, and it will become dark. the smartphone will not heat up.
If you are overlooking the same circumstances then we recommend you to follow the above-mentioned solutions or take your device to the Huawei service center.
Huawei Mate 30 series users facing network issues [China]
Huawei Mate 30 series – the flagship series of 2019 is dealing with a strange network issue. This smartphone appeared on the ground with a bunch of key features and the coolest camera design on the rear side has caught the attention of many individuals in the market.
However, when we are talking about any technical stuff, there are high possibilities to find a few bugs and issues at the gateway. The same goes with the Huawei Mate 30 series which is now confronting issues with the network.
Huawei Mate 30: Network Issue
Currently, the tip-top device is running on the March 2022 HarmonyOS update with version 18.104.22.168 in China. While the update promises to offer better stability and reliance on the device, users are criticizing it. According to them, the new update made their device stuck on the network problem for both the 4G and 5G variants.
Further, some users report that even when the signal bars are full, it’s not possible to have clear communication over calls. Moreover, often the calls break off no matter whether you are in a high-range network area.
Huawei Mate 30 Pro 5G: Same Issue
Huawei Mate 30 Pro 5G owners are also going through similar cases. One of the users claims that when the phone is in the wireless connection, the traffic gets turned off. As a result, one can make outgoing calls but finds it difficult to respond the incoming calls.
The Chinese manufacturer has not shown any specific response to the connectivity issue till now. Meanwhile, users are trying different ways to tackle the problem. But they failed to find a permanent rescue for this bug. So, are you also confronting the network issue with Huawei Mate 30? Let us know in the comments below.
Huawei P30 series users facing charger issue [HarmonyOS 22.214.171.124]
Huawei P30 series is the well-known previous-gen flagship series that contains two models P30 and P30 Pro. Recently, Huawei has pushed off the March 2022 software update for the Huawei P30 series working with HarmonyOS 2.0 in China.
The March 2022 update for the Huawei P30 lineup landed on the ground with HarmonyOS build number 126.96.36.199. For your information, the new update rollout was started in the first week of May and since then it has been expanding in batches among the Chinese consumers.
After the installation of the March 2022 update, Huawei P30 series smartphone users have started facing the charger issue, which is very serious. Several P30 device owners have reported the same on the forum.
According to a Huawei P30 smartphone user, after upgrading to the newest HarmonyOS 188.8.131.52 firmware version, the corresponding phone begins showing the prompt with the message “It is not the original charging adapter, which reduces the charging speed”.
However, the user mentioned that he is using the original charger adapter. Still, every time the user tries to charge the phone the message always appears. Yes! it is really disappointing issue for the P30 device owners because the phone charging is one of the major parts.
So, are you one of the Huawei P30 series users, who is facing the above-mentioned problem after upgrading? If yes, then we have some tips and solutions posted by moderators.
Here’s how to get rid of the Huawei P30 charger issue:
Following the mentioned issue, some users and moderators posted the solutions and tips, which can help you to resolve it. So, let’s jump into the solution.
Primarily, you need to check the adapter’s cable and replace it with another. Afterward, check it again is the issue solved? If yes, very well and not then it’s not the cause behind this problem.
Some users posted that this issue can be resolved after updating the multi-camera. So, we recommend you download and install the latest version of the multi-camera.
On the flip side, a moderator wrote that after the phone version is updated, the system will have some application running in the background to optimize the performance. Therefore, sometimes the temperature of the device increases and can cause slow charging issues. Please wait patiently for a few days and continue to observe the charging situation.
We hope that this article will surely be useful for you. Feel free to share your thoughts in the comment section.