Connect with us

Updates

Huawei FreeBuds 3 new update brings double-tap to end phone call feature

Published

on


Huawei’s latest true wireless earbuds – FreeBuds 3 comes with active noise cancellation, comfortable and stable design, studio-quality audio and more.

To improve this device Huawei pushed a new software update that adds a double-tap feature to end a phone call and also includes other optimizations (Full changelog below).

The new update for Huawei FreeBuds 3 comes with version 1.9.0.208 in a small 0.54MB package.

How to Update:

Advertisement
  1. Open the AI Life app.
  2. Make sure the earphones have been connected to your phone and earphones are placed inside the charging case, leave the charging case open, then select the corresponding card for your earphones to access the device home screen.
  3. Touch Check for updates.
  4. If an update is available, touch UPDATE.
  5. Wait until the update is complete.
  6. After the update is complete, close the charging case and wait for 10 minutes for the case to be automatically updated.

ChangeLog:

Note: Please put both earbuds into the charging case before updating, and keep the case open until the update is complete. Please ensure that the battery levels of both the earbuds and the charging case are higher than 30% before updating.

What’s new: Double-tap the right earbud to end a phone call.

Optimizations: Improves the stability of the Bluetooth connection. Optimizes the audio experience.

Advertisement

Amy is our firmware and software specialist, she keeps her eagle eyes open for new software rollouts, beta programs, and other software related activities as well as new smartphone launch.

HarmonyOS

Huawei Mate 20 Pro HarmonyOS portrait service widget feature rolling out

Published

on

Huawei Mate 20 Pro portrait camera widget

Huawei is rolling out a new software update for the Mate 20 Pro that brings an important HarmonyOS portrait gallery service widget feature. This is an addition to other ingredients of the latest software rollout for the Mate 20 device in China.

The changelog is identical to the software rollout that became visible for the Huawei Mate 40 series, very recently in China. Therefore, the same update is now being sent to these three years old flagship.

According to the information, the Huawei Mate 20 Pro portrait service widget feature update comes with HarmonyOS version 2.0.0.207 along with an update package size of 0.97GB. This is quite a big package because there’s a lot more to explore.

The latest portrait service widget allows you to rotate photos (in gallery view), swipe to change them to change the on-screen image, or click on the photo to open the app for a large view of selection.

Advertisement

The new software update for the Huawei Mate 20 Pro has a better service center, a new cross-device task manager, adds Celia keyboard as well as system stability and AI Celia voice assistant improvement.

This update is currently expanding in batches for the Huawei Mate 20 series models running HarmonyOS 2.0 in China. Therefore, the Chinese tech maker is now wondering to improve the device with the latest enhancements as possible.

The latest software rollout is only available for the Chinese consumers of the Huawei Mate 20 Pro, while the global users still run EMUI 11 software system and waiting eagerly for the next major upgrade.

Huawei Mate 20 Pro Portrait HarmonyOS service widget

How to Update

If you have the Huawei Mate 20 or Mate 20 Pro with the HarmonyOS operating system, you can check for the update via the following instructions.

Advertisement

Go to the settings section. To do this, open Settings > Software & updates > updates, Check for updates, and if available, download and install. Your phone will restart and begin the installation process.

Before you begin, it’s recommended that you charge your smartphone sufficiently so it won’t run out of power during the update procedure. Also, keep a backup of your important data, so you won’t lose a nick of your important memories. Furthermore, the downloaded update package will be deleted automatically once the installation finishes.

Continue Reading

EMUI

Huawei MatePad Pro 10.8 and MatePad 10Ts getting new EMUI software updates

Published

on

Huawei Matepad pro

Huawei MatePad Pro 10.8-inch and MatePad T10s are receiving new software update in the global market. These phones are checking this software rollout with EMUI software versions including 11.0.0.217 and 10.1.0.190 respectively for both of these tablets.

For your information, these two devices are eligible to upgrade over HarmonyOS in China but the situation remained unknown for the global consumers.

Aside from this, the MatePad Pro 10.8 is receiving a new September 2021 security patch. On the other hand, the Huawei MatePad 10Ts brings a new changelog with lots of brand new changes. Check it linked down below.

Huawei MatePad Pro Update Changelog:

Integrates security patches released in September 2021 for improved system security. For more information on the security of Huawei EMUI system updates.

Advertisement

huawei matepad 10s update

Huawei MatePad T10s changelog:

Apps:

Improves the horizontal display in certain third-party apps. Adds a quick download shortcut for Celia Keyboard to the home screen. The app can be downloaded by tapping the shortcut. (Note: If the setting for Auto-update of apps in AppGallery is set to On or Wi-Fi only, app updates will be downloaded and installed automatically when the network connection is good.)

System:

Improves system stability in certain scenarios.

Advertisement

Security:

Integrates security patches released in September 2021 for improved system security. For more information on the security of Huawei EMUI system updates.

How to update these two tablets?

How to check for download:

Via Settings

  • Open Settings
  • Then tap on System & updates.
  • Click Software update.
  • Tap on Check for updates option.
  • If a new update shows up, then click Download and install.

Via Support app:

  • Alternatively, the users can also check for the new update via the Support/My Huawei app. To do so:
  • Open the app.
  • Then go to the Service tab and click the Update button.
  • Tap on Check for update option, if found any then click Download and install.
  • After installing reboot the device.

Here are some of the important notes:

  • Your personal data will not be deleted by the update. However, we recommend that you back up important data before updating.
  • If you encounter problems during the update, call the Huawei customer service line or visit a Huawei customer service center.
  • The update package will be automatically deleted when the update is complete.

(Source – Huaweiblog – 1, 2)

Advertisement
Continue Reading

EMUI

Huawei Mate 40 Pro global units gets September 2021 security update [EMUI]

Published

on

huawei mate 40 pro

The global units of the Huawei Mate 40 Pro are receiving a new software update that brings September 2021 security update. There could be better if Huawei would have revealed a new major update for the consumers but the Chinese phone maker may be required more time.

According to the huaweiblog, Huawei Mate 40 Pro September 2021 security update comes with EMUI 11.0.0.208 (C432E6R4P1) in the global market. This rollout is now expanding in batches and there are many people that have been waiting to install the latest version.

On the other hand, the Chinese version of the Huawei Mate 40 devices with HarmonyOS a bunch of new features including the cross-device feature as well as other important addition and improvement. Read more here.

huawei mate 40 pro september 2021 security update

(thanks to the tipster – Sargej)

Advertisement

Huawei Mate 40 Pro Update Changelog:

Security:

Integrates security patches released in September 2021 for improved system security. For more information about the security of Huawei’s EMUI system updates, please visit the Huawei official website.

If you want to send us Tips, Update Screenshots, or a Message? connect with us here:

  • Screenshots@huaweicentral.com
  • Tips@huaweicentral.com
  • Message us on Twitter

Before you upgrade:

  1. We recommend you take a backup of your important data.
  2. Use a stable connection to download the update package.
  3. Do not forcefully turn off the phone, once the installation is started.

How to update your smartphone:

There are two ways that you can download this latest software update, both of these areas the following:

VIA SETTINGS:

Advertisement
  1. Go to Settings
  2. Tap on System & updates
  3. Tap Software update
  4. Tap Check for Updates
  5. Download and Install
  6. Install

After the installation and restart, we recommend you let the system optimize the new application so your device can run smoothly on further commands.

VIA SUPPORT:

You can also request this update via the Support app with the following instructions.

  1. Open the Support app
  2. Go to the Services tab
  3. Tap on Update
  4. Download and Install
  5. Install
Continue Reading