Connect with us

Wearables

Here are all of the changes rolling out with major Huawei Watch GT 2e update

Published

on

Huawei Watch GT 2e major update

Recently, Huawei is rolling out a major firmware update for the Huawei Watch GT 2e that comes with a bunch of new changes made to the system. After installing this update, the performance of the smartwatch will be optimized along with the entire user experience.

According to the information, Huawei Watch GT 2e major software update reaches the users with a package size of around 250MB. To be mentioned, this update comes with a large installation OTA, so it may take a little bit of time to download and install it on your device. Keep patience and make sure that Bluetooth connections do not get disconnected during the installation process.

By looking at the changes, we found that the update brings the important support to install unlimited third-party apps from AppGallery to the smartwatch. Also, it has new workout data synchronization support for Huawei phones and fitness devices. This would allow you to sync your data with the corresponding connected devices in real-time.

Especially talking about health features, this update allows you to install the Heart Study App, which monitors heart health and makes the relevant data available. Lastly, it added a system optimization to smoother actions.

Advertisement

One thing to be mentioned is that some Huawei Watch GT 2e users are receiving the same version update with a different changelog. As per the new information, this update added sunrise and sunset display as Always-on display features during workouts. So, Huawei Watch GT 2e user, you can check both changelogs in the details listed below.

Huawei Watch GT 2e major update

If you want to send us Tips, Update Screenshots, or a Message? connect with us here:

  • Screenshots@huaweicentral.com
  • Tips@huaweicentral.com
  • Message us on Twitter

Huawei Watch GT 2e: Major update changelog

Update log 1:

Apps:

  • Third-party apps can be installed (open HUAWEI Health -> Devices -> HUAWEI Watch GT2e -> AppGallery

Workout:

  • Supports data synchronization on HUAWEI phones and fitness accessories, as well as the always-on function during exercise, so that workout data can be read in real-time (to activate the function go to Settings -> Workout Settings -> Always On). Adds the sunrise and sunset display for outdoor sports.

Health:

  • You can now install the Heart Study App, which monitors heart health and makes the relevant data available.

System:

  • Increases system performance and stability for smoother actions

Update log 2:

Workout:

Advertisement
  • Adds the sunrise and sunset display for outdoor workouts
  • Supports the Always-on display feature during workouts for you to view your workout data in real-time.

System:

  • Increases system performance and stability for smoother actions

Amy is our firmware and software specialist, she keeps her eagle eyes open for new software rollouts, beta programs, and other software related activities as well as new smartphone launch.

HarmonyOS

Huawei Watch GT 3 gets new features with September 2022 update

Published

on

Huawei Watch GT 3 September 2022 update

Huawei has begun rolling out the September 2022 update for Watch GT 3 device users. It’s just not an update but a package of new features and optimizations for your smartwatch. What are these new add-ons? Let’s find it out.

Before we leap to the features and optimizations package, here are the key details of the new build. The latest September 2022 update for Huawei Watch GT 3 lands on the consumer ground with HarmonyOS 2.1.0.405 version. Further, users need to unblock 57.72MB of free space to install the firmware.

As mentioned, the update brings a medium-sized package for your mini handy gadget. The list begins with the addition of the WeChat feature that enables you to perform several quick functions without the help of your smartphone.

Once logged in, you can view WeChat messages, and can reply to them instantly. Besides, you can also use make quick payments by using WeChat Pay. Next, the list contains some thoughtful optimizations that eventually make your daily life experience much better.

Advertisement

You can check the complete changelog of your smartwatch, below.

Huawei Watch GT 3 September 2022 update

September 2022 Update Changelog

New Features

  • Added WeChat watch features. After logging in, you can view WeChat messages, make quick replies, and voice replies, and can make quick transactions through WeChat Pay

Optimizations

  • Support running power index in indoor running mode
  • Enhance the function of the menstrual cycle, add ovulation day prediction
  • Optimize the alarm clock function, you can set up to 10 alarm clocks to meet more user needs update

Update Instructions?

You can download the update from your handset using the Huawei Health Application. But, make sure that while conducting the installation process, your smartwatch and phone are in Bluetooth connection with each other. Maintain more than 20% of battery level in the wearable. Also, keep patience, as the entire process takes time to adapt to the new system.

Huawei Watch GT 3 September 2022 update

Continue Reading

Wearables

New Huawei Watch Fit 2 update let you connect S-Tag motion sensor

Published

on

Huawei Watch fit 2 S tag sensor

Just after making an easy debut in the market, Huawei Watch Fit 2 becomes the most stylish and loveable smartwatch among users, it bangs with its sophisticated feature and technology. And now Huawei added support to connect Huawei S-Tag motion sensors with Watch Fit 2 through a new update.

Yes! Huawei recently kick off a new update for the Watch Fit 2, which brings a number of new features and system optimization for the users that help you to give a stabilized performance and flawless experience.

Alongside, after updating you can connect your Huawei Watch Fit 2 with Huawei S-Tag motion sensors for better running form detection and cycling data. This gadget was designed for specific sports scenarios and can detect sports data when connected to smart devices.

Moreover, September 2022 update for the Watch Fit 2 added support for the connecting sports accessories such as heart rate belt, cycling cadence, and power meter.

Advertisement

After installing this latest update, you have now many free options to design your smartphone watch and look through the watch faces. You can now experience the riches visual experience on your Huawei Watch Fit 2.

Huawei Watch fit 2 S tag sensor

Additionally, this new update added support to find your Huawei smartwatch using your phone by following some easy steps mentioned below:

  • Firstly launch your Huawei Health app
  • Then click on devices
  • Now Watch Fit 2
  • From here ‘ Find my device to use

Alongside, the update also optimizes your smartwatch performance by adding support for setting multiple ‘Do Not Disturb time intervals.

You can identify this major update of the Huawei Watch Fit 2 through the 2.1.0.165 build version. Users can experience all the above-mentioned features and optimization by only lifting the weight of 272 MB to download and install it.

If you want to send us Tips, Update Screenshots, or a Message? connect with us here:

Advertisement
  • Screenshots@huaweicentral.com
  • Tips@huaweicentral.com
  • Message us on Twitter

(Source)

Continue Reading

Updates

HarmonyOS 3.0.0.341 for Huawei Watch 3 Pro brings new WeChat features

Published

on

Huawei smartwatch WeChat

Huawei is rolling out the HarmonyOS 3.0.0.341 beta version for the Watch 3 Pro WeChat version that comes with a variety of new features for this exclusive WeChat smart wearable.

The company is seeding this new user experience improvement after the succession of past recruitment. According to the information, the company has confirmed HarmonyOS 3.0.0.341 as a base version.

Changelog reveals that Huawei Watch 3 Pro WeChat version is receiving HarmonyOS 3.0.0.341 updates with quick replies, voice replies, and making quick payments through WeChat Pay for a better and more convenient user experience.

To be mentioned, Huawei is currently conducting public beta activity for the Watch 3 series and consumers are just a few steps away from the stable release. Read more here.

Advertisement

Huawei released HarmonyOS 3 public beta for Watch 3/Pro

huawei watch 3 pro harmonyos 3.0.0.341

Below you can check the safety precautions to complete a successful installation.

Huawei Watch 3 WeChat version supports HarmonyOS 2 and Android 9.0, while connected via Bluetooth on smartphones. Before updating to the latest version, you are suggested to update the Huawei Health app through AppGallery to get the best user experience.

Also, make sure that the internet connection remains stable during the download procedure. If it fails, then you can try again.

Advertisement

The update procedure may take some time, hence it’s recommended for you to wait while the OTA package transfers from phone to smartwatch. Once downloaded, the watch will restart to settle the firmware.

Continue Reading