Huawei Mate 40 Pro is one of the high-end smartphones of the company and recently obtained the latest HarmonyOS 184.108.40.206 beta. Unfortunately, the new firmware has not worked effectively and gave a huge headache to Huawei Mate 40 Pro users with several display issues.
Following HarmonyOS 220.127.116.11 upgrade, the Huawei Mate 40 Pro smartphone suddenly started functioning abnormally. A user reports that the phone becomes very stuck while performing the unlock function. Besides, the screen is directly offset and does not responds efficiently.
Also, the user describes that after opening any application, the swiping up and returning is very slow. Overall, there were continuous stoppages while performing any action on the display panel.
Another user explains that on executing background functions, the screen abruptly freezes. Consequently, this freezing is a huge hurdle between screen recording and screenshot actions. This all things are happening just after the installation of HarmonyOS 18.104.22.168 firmware.
Below you can check the issues in detail
- Unlocking the phone becomes very tough
- The screen is not responding effectively
- The negative screen does not work and denies to drawn out
- Mate 40 Pro enters and exits the screen-saver interface after pressing the unlock button
- The phone screen freezes at the beginning and continues even after the deletion of a few apps.
It is worth mentioning that HarmonyOS 22.214.171.124 beta version mainly focused on optimizing the display effect for the Mate 40 series. Ironically, instead of enjoying any new element, Huawei Mate 40 Pro users are puzzled by display issues.
Suggested steps to take for such issues
Though Huawei hasn’t commented anything on this matter so far. But other consumers started helping the needy ones with their suggestions:
- Clean up the background applications and try to avoid multiple apps running in the background at the same time.
- Clear the storage space and uninstall the applications that you do not use frequently.
- Re-insert the memory card and check whether the problem still exists.
- Change the unlock and screen settings
If we consider the company’s algorithms, then beta versions are not stable updates. Hence, the developers often warn the users before installing the new beta rollout as it might contain some bugs or defects.
So don’t worry. Huawei will soon roll out a stable and improved update for your Mate 40 Pro smartphone. Till then, tell us in the comment section whether you are going through the same issue or are busy dealing with some new puzzles of the HarmonyOS 126.96.36.199 update.
Camera issue on Huawei P30 Pro remains even after November update
Huawei recently started pushing November 2022 software update for the P30 Pro smartphone in the global market but there’s no effective fix to a camera issue. Users reached us and mentions that the camera focus bug remains persistent even after installing November 2022 software update.
Since May, we’re reporting about Huawei P30 Pro and its camera issue. However, Huawei should have fixed it by now. Since it’s still unfixed, consumers are having trouble taking pictures with their Huawei P30 Pro.
According to the information, there are various bugs and issue spotted in the Huawei P30 Pro. These include loss of focus (automatic) while focusing on a subject, and unable to focus on a subject or a scene.
In some cases, the Huawei P30 Pro camera app is randomly crashing and it’s quite annoying.
November 2022 Update:
Past rollout reveals that Huawei P30 Pro is receiving November 2022 EMUI software update with improved system security. However, the changelog doesn’t mention any specific fixes for the camera or related features.
To be mentioned, the majority of the Huawei P30 Pro users found this issue after upgrading to the latest EMUI version, EMUI 12. They stated that the phone was working fine just before we installed the newest update.
So it could be a software issue and a patch or improvements update may fix it. However, we don’t a clue what Huawei is doing in this matter.
We got tired of waiting for fixing camera problems in Huawei p30 pro. camera is blurry, can't focus unless I set the wide mode
Please find a solution ASAP before we boycott Huawei and go to Apple
The problem appeared for alot of users after last update EMUI 12
— Snow Night (@Snownight100) December 4, 2022
Anyone else with a huawei p30 pro having issues with the camera? Tried their online chat and went round in circles. Did everything they suggest on their website and it still can't focus. Mainly chose this phone for the camera @HuaweiMobile @Huawei
— ShelbieRogers (@MissShelbie123) July 22, 2022
Nothing is working:
Some users on the Huawei China community suggest that this issue could be resolved by clearing the camera cache from App’s settings. But it didn’t work at all.
Do you have any solution?
Yes, this camera issue is bugging a lot of Huawei P30 series owners. So, share your thoughts and solution if you have any in the tweet below.
What's the status of your Huawei P30 series camera issue? How worse or how it was resolved (if).
— HC Newsroom (@HCNewsroom) December 6, 2022
Check for updates:
Meanwhile, we suggest you keep an eye on the software update section to see if there are a patch or software updates rolls out for this specific camera bug.
I was shocked to see this HarmonyOS 3 bug
After installing a patch for the SuperHub feature, my Huawei smartphone with HarmonyOS 3 acted weirdly due to a bug. Because it has lapsed a feature that was there and I like the most in this operating system.
Following the update, the app snippets also known as app swipe-up gestures vanished from the home screen. I was shocked to see that happen.
As you can see in the screenshot, the bar under the app icons disappeared. That’s not it, the feature also stopped working. This was quite strange, as I thought that the feature has now been removed.
However, the solution was easy to knit and it was right before my very eyes. All I have to do is to restart the phone, which restored the feature as well as its user interface appearance.
Bugs and glitches are usual to see in any development software or feature that could appear at any time. Since Huawei is continuously adding new features to HarmonyOS, we can expect these minor glitches to shock us, just like this one.
Be noted, the bug appeared after I installed HarmonyOS 188.8.131.52, which brings a number of new features for smart devices.
Huawei App Snippets allows you to open key features of an app without opening that app. This is quite a useful feature that allows and you won’t find such capability in other smartphone operating systems such as Android and iOS.
You just have to swipe up on an app icon to open a floating window with key features. For example, if you swipe over the browser app icon, the floating window will show a search bar, bookmark bar, and scan button. There’s also a pin button on the top right corner of the window to make it a service widget.
Android 13 QPR1 beta 3.1 removes Vo5G on some Pixel 7
A few days ago, Google rolled out Android 13 QPR1 Beta 3.1 for beta testers, and some users reported losing Vo5G on some Google Pixel 7 smartphones. Google is rolling out the Android 13 QPR1 Beta 3.1 patch (T1B3.221003.008) for Pixel 4a, 5, 5a, 6, 6 Pro, 6a, 7, and 7 Pro series devices.
Vo5G is similar to the voice in today’s 4G networks. In 4G LTE, voice calls are implemented as end-to-end Voice over IP (VoIP) connections managed by an IMS core. Voice and video communication services in these networks ride on top of the IP data connection. When the call happens over LTE, it is called Voice over LTE (VoLTE), and when it is over Wi-Fi, it is known as Voice over Wi-Fi (VoWi-Fi).
A Pixel 7 user on Reddit wrote: “Just noticed that it’s gone now, was there in beta 3.0 – anyone else?” Another user in the comment replied with a solution that the Android 13 QPR1 beta 3.1 Vo5G issue may require it to re-enable manually.
However, a user revealed that the option is gone and there’s no way to get it back. On the other hand, a user shared instructions to get this option back on phone (here’s the link)
Android 13 QPR1 Beta 3.1 is available to download for the existing beta build. As it may take up to 24 hours to receive the OTA update on your device. You can check for updates by going to Settings > System > System updates.
Below you can check all of the Android 13 QPR1 Beta 3.1 release notes:
- Fixed issues where a device’s GPU drivers sometimes caused the system UI to freeze during normal device use.
- Fixed an issue where Pixel phones sometimes displayed an incorrect “Missed call” notification instead of “Call answered on another device” when the call was answered remotely by Pixel Watch (in untethered mode).
- Fixed an issue that sometimes caused the Google Camera app to crash.
- Fixed an issue that prevented Google Assistant from being activated by hotword on some devices.
- Fixed an issue that prevented motion-based gestures, such as “Lift to check phone” or “Flip to Shhh”, from working on some devices.
- Fixed an issue that sometimes caused artifacts to display when recording or viewing video on some devices.
- Fixed an issue that sometimes caused the Google Camera app to launch slowly.
Fixed an issue for Pixel 6a devices that sometimes caused the CarrierSettings to crash when inserting a SIM card.
- Fixed that issue that prevented the “Go to browser” option in the notification shade from working while using an instant app.