Connect with us

HarmonyOS

Huawei Watch GT 3 Pro June 2022 update rolling out in Europe

Published

on

Huawei Watch GT 3 Pro June 2022 update

Huawei Watch GT 3 Pro has started collecting the June 2022 security update, now in Europe. The firmware was initially deployed in the Chinese market, and now it’s all set to approach the users residing in the European region.

The latest Huawei Watch GT 3 Pro June 2022 security update comes with HarmonyOS 2.0 software in Europe. Alongside the upgraded security patch, the users will also find some changes and innovations in the system. But before exploring the changelog, let’s learn about the version that is available with the software.

European users with Huawei Watch GT 3 Pro are attaining the June 2022 update with build number HarmonyOS 2.1.0.358. The version has shifted from 2.1.0.316. Further, it showcases a software package of 397 Megabytes.

Changelog of June 2022 update

The changelog reads the following implements for the respective smart wearable:

Advertisement

Optimizations

  • This update improves user experience in several situations and optimizes system stability.
  • Optimizes system stability in certain situations.

Updates

  • You can find the watch on your phone (Huawei Health > Devices > HUAWEI Watch GT 3 Pro > Find Device)
  • Support iPhone music control

Huawei Watch GT 3 Pro June 2022 update

Additional Changes

Apart from the changelog, the firmware brings some alternate variations in the system. Here are the new tweaks that didn’t show up in the changelog but you will find them in the device after the update.

1. No support of ECG funtion

So far, we mentioned that the premium watch has gained the support of ECG function and will soon roll out to all the consumers. However, it does not go the same. The latest update does not hold the ECG function for the device.

Earlier, the function appeared for the Turkey version. However, European users have to wait for the EU certification.

2. Arteriosclerosis Risk Screening support

The update seems to appear with both – advantages and drawbacks. If it lacks something, then it has a few more surprises for the user. Here is a new feature – Asteriosclerosis Risk Screening. The feature helps in measuring the hardening of arteries through lateral sensors. You can find the function in the Health app, where you can enable it.

Advertisement

Further, there comes a new app, that takes care of all the measurements that you carry out through your smartwatch. Press the bottom button on your watch and track the measurements.

[Source]

Yash is a graduate of computer science and followed his way into journalism, he is interested in various subjects related to technologies and politics. Yash likes to listen classical songs and has a huge library of classical mixes.

Continue Reading
Advertisement

HarmonyOS

Broadcom BK7235 processor combines with OpenHarmony

Published

on

OpenHarmony Broadcom BK7235 processor

Broadcom Integration Group recently launched a new BK7235 high-end processor and merged it with the OpenHarmony operating system. The chipset aims to enhance IoT connectivity and bring new improvements in the security aspects.

OpenHarmony is well-known for its compatible connections as well as all-scenario operations. It contains an advanced and tech-pack connectivity system that can support all smart devices effectively.

And to make these connections more reliable, Broadcom group has integrated a BK7235 processor in the OpenHarmony framework. Accordingly, it will facilitate the operating system with rich storage and a robust security structure.

On the other hand, it can provide numerous immediate options for commercial purposes. For instance, lightweight audio quality, new upgrades for functions, controlling management, and more.

Advertisement

Let’s understand the high-end BK7235 processor in detail.

BK7235 MCU Chipset – Two Versions

Broadcom BK7235 chip is an MCU (micro-controller unit). It has two variants: single-core and dual-core. The single-core chip installs a 656KB RAM and supports 26 GPIOs (General Purpose Input/Output), and a 5V direct power supply. It is appropriate for 5V smart home gadgets.

Meanwhile, the BK7235 dual-core version packs 800KB RAM and a high-speed 8MB Dynamic RAM (DRAM). Further, it supports single and multiple cloud connections, 48 GPIOs, dual microphones, a CIS camera, 16-bit LCD, and significant coding functions.

BK7235 processor – efficiency

Both versions use a self-developed security infrastructure to offer tough security protection for the entire operating system. Aside from the regular security components, the processor also equips the powerful P-384 encryption protocol to access verified algorithms.

Advertisement

It’s worth mentioning that the respective chipset has also qualified for the PSA level 1 safety certification. Hence, it will make useful changes in the OpenHarmony operating system.

Moreover, the processor easily operates and manages common, commercial, and authorized passwords. For instance AES, RSA, ECC, SM2, SM3, SM4, and more. Together, these qualities will help in providing efficient security protection to the IoT and other network devices.

In addition to the magnificent safety functions, the BK7235 chip is eligible for Wi-Fi 6, and Bluetooth 5.2, and supports various third-party network connections. Hence, the chipset could prove a beneficial implementation for the OpenHarmony community.

OpenHarmony Broadcom BK7235 processor

(Source)

Advertisement
Continue Reading

HarmonyOS

Huawei MatePad Pro 10.8 gets SuperHub feature with HarmonyOS 3 public beta

Published

on

Huawei MatePad Pro 12.6

Huawei MatePad Pro 10.8 tablets are grabbing the HarmonyOS 3.0 public beta update along with the smart SuperHub feature. The update also optimizes the system’s stability and improves the overall functioning of the gadget.

According to the information, the latest update for the MatePad Pro 10.8 tablet users is arriving with HarmonyOS 3.0.0.163 build version and 1.0GB package size. It is recommended to opt for a standard Wi-Fi network for installing the new firmware.

Moreover, the update is only compatible with the following models:

  • Huawei MatePad Pro 10.8 (MRX-AL09)
  • Huawei MatePad Pro 10.8 (MRX-AL19)
  • Huawei MatePad Pro 10.8 (MRX-W09)
  • Huawei MatePad Pro 10.8 (MRX-W19)
  • Huawei MatePad Pro 10.8 (MRX-W29)
  • Huawei MatePad Pro 10.8 (MRX-W39)
  • Huawei MatePad Pro 5G 10.8 (MRX-AN19)

Speaking of the additions, the fresh update brings the unique SuperHub feature for the Huawei MatePad Pro 10.8 tablets. Eventually, this section allows you to easily share various content between different apps and devices.

On the other hand, you can simply drag and drop pictures, texts, documents, links, and more from one app to the SuperHub Transfer feature. Further, the update adds a new mouse pointer icon. This allows you to adjust the speed of the mouse pointer on the tablet.

Advertisement

What else? Well, the new update integrates the latest November 2022 security patch. As a result, you will experience a reliable and more responsive system after feeding the new update to your tablet.

HarmonyOS 3.0 public beta changelog

New Additions:

  • Added the SuperHub (Smart Transfer feature) which enables you to share various content between apps and devices. Just long press and drag pictures, texts, links, and more to SuperHub.
  • Added a new mouse pointer icon that allows adjusting the speed of the mouse pointer.

Security:

  • Incorporates the November 2022 security patch to enhance the system security

You can install the latest update through the Settings menu. However, make sure that you have HarmonyOS 3.0.0.127 as the baseline version. Also, take a backup of the device beforehand so that the new update may not harm your data.

[Source]

Advertisement
Continue Reading

HarmonyOS

Huawei MatePad Paper new update brings unique changes to Notes app

Published

on

Huawei MatePad Paper

Huawei is rolling out a new update for the MatePad Paper global users that brings unique changes to the Notes application. While the update also holds useful optimizations for the device alongside.

The latest Huawei MatePad Paper update is quite interesting as it includes a new Notes app version. Eventually, this new app build will enhance the overall user experience. Besides, it provides a variety of new functions.

To begin with, the Notes app now supports multi-level folder placement. As a result, you can manually assemble the notes and subjects in the folders at your convenience. In addition, the new app version optimizes the syncing and copying features.

Aside from the Notes app, the MatePad Paper update also mends the device system. As of now, users can easily add an app to the sidebar by drag and drop method.

Advertisement

In terms of security, the fresh update brings the September 2022 improvements patch. This is a little strange point, as many of you might be expecting the November 2022 security patch for the tablets.

However, the corresponding patch has its own merits. It fixes 29 system exploits and resolves more than 37 third-party library vulnerabilities. Hence, we will recommend you install the latest firmware.

You can read the full changelog below:

System Applications: Notes

  • Updated Notes app to 12.3.0.400 version
  • Added multi-level folder feature
  • Enhanced syncing function on tablets and phones
  • Improves copying long content between pages and notebooks

Books:

  • Allows bookshelf to group books by user-defined group names

System and Security:

  • Enables the user to add an app to the sidebar by tapping and holding the app icon
  • Integrates September 2022 security patch
  • Increases system security and stability

While the update is appearing through the OTA process, you can sneak into the update section to install the firmware manually.

Although make sure that you have a sufficient amount of space for installation. Besides, keep the battery level above 35%. The update will not harm your essentials. Yet it will be better if you proceed with a backup.

Advertisement

Huawei MatePad Paper

[Source]

Continue Reading