Connect with us

HarmonyOS

Huawei P10 series getting new featured updates (HarmonyOS)

Published

on

huawei p10 new features

Even after 5 years of its launch, Huawei is sending new features for Huawei P10 and P10 Plus smartphones in China that run HarmonyOS operating system. According to the information, Huawei P10 and P10 Plus smartphones are getting firmware version – 2.0.0.150 upgrading from HarmonyOS 2.0.0.140.

HarmonyOS 2.0.0.150 upgrade for Huawei P10 series comes with new features and optimizations for display UI, games, anti-mistouch operating, new VOLTE feature for China mobile, getting audio playback for Bluetooth headphones. The update integrates February 2022 security patch for improved system security.

Huawei P10 series is powered by Kirin 960 processor with quad-core architecture including 2.4 GHz Cortex-A73 and quad-core 1.8 GHz Cortex-A53) with Mali-G71 MP8 GPU. The phone has a big battery and large display size and a dual rear camera as well as 8MP front-facing camera.

The phone is shipped with EMUI 8.0 based on Android 8 and it is upgraded with subsequent EMUI versions.

Advertisement

Rolling out in China:

The latest Huawei P10 series update is currently rolling out in China but currently, it’s not confirmed to expand to the global market. On the other hand, the global version is not eligible for EMUI 12 software update.

huawei p10 new features

Update Notes and update instructions

  • P10 – VTR-TL00
  • P10 Plus – VKY-AL00
  • P10 Plus – VKY-AL00
  • P10 Plus – VKY-TL00

Update Changelog:

  • Display: Optimize the display of some UI content.
  • Games: Optimize the anti-mistouch operation experience in-game scenarios.
  • Communication: Enable the China Mobile VoLTE voice call function by default (this service needs to be activated separately).
  • System: Optimize the audio playback of Bluetooth headsets experience.
  • Security: Integrates the February 2022 security patch to enhance security.

Huawei P10 series users can download and install the latest software update by going into Settings > then head towards System & updates > from here tap on the Software update and then CHECK FOR UPDATES. From here, tap on the following instructions to get this update onboard.

However, we suggest the Huawei P10 series users with HarmonyOS back up their smartphone’s data before heading towards the new software update.

Advertisement

Most of Deng Li's smartphones are from the Huawei ecosystem and his first Huawei phone was Ascend Mate 2 (4G). As a tech enthusiast, he keeps exploring new technologies and inspects them closely. Apart from the technology world, he takes care of his garden.

HarmonyOS

HarmonyOS 3.0 shuffles status bar icons, check comparison with HarmonyOS 2.0

Published

on

By

harmonyos 3.0 status bar icons

Huawei is conducting HarmonyOS 3.0 developer beta run on smartphones and the company has made some shuffling in the status bar icons of the software. Although, the exchange was minor but it says a lot about Huawei’s intention of making the OS perfect as it now looking into deeper roots and removing all of the weak angles.

Coming to the status bar shuffle, Huawei has changed the position of some icons from left to right in the HarmonyOS 3.0. For instance, the WiFi icons are now moved toward the right, while the clock has been shifted to the left along with the notification icon. There are also some icons that have been removed from the status bar, which are no longer required to show.

harmonyos 3.0 status bar icons

Comparing these changes to HarmonyOS 2.0.

HarmonyOS 2.0 has WiFi and notification icons on the left while keeping the rest of the icons on the right. As you can see, the clock has had been on the right side of the status bar.

Advertisement

harmonyos 3.0 status bar icons

The changes in position might be related to the feedback from consumers. However, it’s not a final image of the software. As it will continuously be improved on the road to begin public beta testing for more Huawei smartphone users.

Thereafter, feedback will further shape HarmonyOS 3.0 for the final release.

A week ago, Huawei began registration of HarmonyOS 3.0 developer beta for the public Huawei smartphone users. This enables the phone owners to jump into the beta program stage and download the latest HarmonyOS 3.0 developer beta firmware.

According to the information, Huawei is still registering smartphone owners in China for HarmonyOS 3.0 developer beta testing until July 15. Hereafter, the company will continue to evaluate and send beta builds for the registered Huawei devices under the beta testing phase.

Advertisement

Currently, the Huawei HarmonyOS 3.0 developer beta is began testing on the following models: P50, P50 Pro, P50 Pocket, Mate 40, Mate 40 Pro, Mate 40 Pro 4G, Mate 40 Pro+, Mate 40 RS Porsche Design. Huawei tablet: MatePad Pro 12.6-inch 2021 model.

(via – Source)

Also, Read:

HarmonyOS 3.0 Developer beta models and versions [List]

Advertisement
Continue Reading

HarmonyOS

Huawei May 2022 HarmonyOS update rolling for Honor 9X series

Published

on

May 2022 update Honor 9X

Honor 9X series which consists of the standard 9X model and the Pro variant is finally receiving the May 2022 security update. The update is rolling out in batches and will gradually expand among the corresponding device users.

The latest firmware is upgraded from the HarmonyOS 2.0.0.232 version and appears as 2.0.0.235. Moreover, it is only compatible with specific models of the Honor 9X series. Hence, users must check the device version and model, before installing the update.

Adapting Models:

  • Honor 9X (HLK-AL00)
  • Honor 9X (HLK-AL00a)
  • Honor 9X Pro (HLK-AL10)

Users holding Honor 9X series smartphones must note that apart from increasing the system security and stability, the latest May 2022 update does not mingle any new changes. Yet, it mends the common issues and exploits of the system, resulting in smooth functioning of the device.

  • Incorporates May 2022 security patch that enhances system security.

May 2022 update Honor 9X

How to Update Honor 9X Series?

Although the OTA update is on its way, you can try the manual trick to grab the software. Just go to the Settings, and click on the System & Updates. Further, tap on the Software Updates followed by the Check for Updates.

Let the phone connect to the server, and bring the latest update on the screen. To the available update, hit the Download and Install button. Thereafter, we recommend users let the system optimize the new application so that the device could run efficiently.

Advertisement

Honor 9X series

There isn’t much difference between the classic 9X and the Honor 9X Pro smartphone. Both the device features a 6.59-inch LCD panel and appeared with the Android 9 system on the consumer platform.

Besides, both smartphones sport a tri-cam plateau on the back side. This plateau gives space to a 48MP prime shooter, an 8MP ultrawide lens with a 120-degree angle, and a 2MP depth sensor. On the front side, the devices display a motorized pop-up camera of 16MP.

(Source)

Advertisement
Continue Reading

HarmonyOS

Huawei Enjoy 20 Plus 5G gets June 2022 HarmonyOS update

Published

on

Huawei Enjoy 20 Plus June 2022 update

The 5G capable smartphone – Huawei Enjoy 20 Plus has started grabbing a new software update that integrates the June 2022 security patch. The firmware is carrying the latest HarmonyOS version 2.0.0.234, updated from HarmonyOS 2.0.0.233.

According to the information, the new June 2022 update for Huawei Enjoy 20 Plus handset enhances the system security. Consequently, it shields the core structure of the device in order to protect it from minor bugs and issues.

Apart from these improvements, the update also increases the system stability and boosts the performance level of the device. Thus, making the smartphone system more comprehensive and responsive to the users.

Huawei Enjoy 20 Plus June 2022 update

Currently, the update is rolling out in batches, which indicates that it will take a long while to approach all the devices. In the meantime, users can try the manual method to reach the new update by navigating to the phone’s Settings, followed by System & Updates, and Software Updates.

Advertisement

Further, tap on the Check For Updates and wait for the phone to get the latest update for you. Thereafter, click on the Download & Install option, and continue the installation procedure.

Models receiving updates:

  • Huawei Enjoy 20 Plus 5G (FRL-AN00a)
  • Huawei Enjoy 20 Plus 5G (FRL-TN00)

New Software Detail:

  • Latest Version: Huawei Enjoy 20 Plus 5G users getting HarmonyOS 2.0.0.234
  • Changelog: Updated to the security patch released in June 2022 for improved system security

Huawei Enjoy 20 Plus 5G

The round-mounted camera smartphone featuring a 6.63-inch IPS LCD screen appeared in 4 shiny colorways. Showing a battery capacity of 4200mAh with fast charging of 40W, Enjoy 20 Plus has been an iconic model in the Enjoy lineup.

The device captures a 48MP primary lens, with an 8MP ultrawide shooter, and a 2MP macro sensor. On the front side, it packs a motorized pop-up selfie camera of 16 megapixels.

If you want to send us Tips, Update Screenshots, or a Message? connect with us here:

  • Screenshots@huaweicentral.com
  • Tips@huaweicentral.com
  • Message us on Twitter

[Source]

Advertisement
Continue Reading